Hot: Micro 3D Printing With Heat-Resistant Materials

High-performance polymers for use in high-temperature range developed by Cubicure and UpNano for 2PP 3D printing.

Vienna, Austria, A new high-performance polymer with exceptional heat resistance is ideally suited for ultra-precise 2-photon polymerization (2PP) 3D printing. This will enable micro-3D printing to meet the specific requirements of the electrical industry for the first time. This breakthrough in the 3D printing industry is made possible by a successful collaboration between two high-tech companies, Cubicure and UpNano. The jointly developed material „UpThermo powered by Cubicure“ is available now. It will be exhibited at Formnext in Frankfurt, Germany in November 2022.

Ultra-precise 2PP 3D printing requires special starting materials. However, until now, these have not allowed the production of temperature-resistant components with the stability needed, for example, in the electrical industry or for the production of micro-injection molds. With the UpThermo material powered by Cubicure, a heat-resistant high-performance polymer is now available for the first time that is suitable for 2PP 3D printing.

Top Value in Heat Resistance

The UpThermo material, which is available immediately, is stable up to 300 degrees Celsius (HDT-B, the test specimens were printed with a length of 35 mm). This unprecedented value for a 2PP 3D printable material allows it to be used wherever higher temperatures prevail and maximum precision is required. Components for the electrical industry, for example, are one of the possible areas of application for the material.

The prerequisite for this innovation was the hot lithography technology developed and patented by Cubicure GmbH. This allows the processing of highly viscous materials in precision 3D printing and thus creates components with unimagined material quality. Dr. Robert Gmeiner, CEO of Cubicure, comments: “Hot Lithography opens up a wider process window – also for light-polymerizing micro 3D printing. With our technology, polymers can be tailored to their application purpose and high-temperature-resistant components can also be produced. That was the basis of our collaboration with UpNano.”

UpNano GmbH produces the NanoOne series of 2PP 3D printers, currently the fastest and most precise printers of their kind, which have their field of application in industry as well as in research. The ability to print structures with nanometer resolution as well as in centimeter sizes makes the series extremely desirable and successful. Although the printers’ applications already include electronics in addition to micro-optics and biocompatible applications in cell and medical research, the use of 2PP 3D printing in this industry has been limited by the lack of heat resistance of the printable materials. The increase of that has now been achieved in collaboration with Cubicure. The company already successfully offers an extensive portfolio of performance materials: Precision materials, high-temperature materials with good fire resistance, impact-resistant photopolymers, and elastomer-type materials that are widely used in industry.

Material Matters

The joint material development of Cubicure and UpNano now makes it possible to combine the advantages of hot lithography with the precision of 2PP 3D printing. This allows the scope of micro 3D printing to be extended to new areas. Existing NanoOne 3D printers can also be retrofitted with Hot Lithography technology to produce a wider variety of components. Once again, UpNano is leading the pack when it comes to opening up new application areas for 2PP 3D printing with new materials. The company has already demonstrated its expertise in materials development in the past with the introduction of the industry’s first black material (UpBlack), an optically translucent material (UpOpto), and one suitable for printing with living cells (X Hydrobio INX©).

About Cubicure GmbH (as of 2022)
Cubicure develops, produces and distributes system solutions for industrial 3D printing of plastic parts. With roots in university research and the ambition to help shape the digital future of industry, the Vienna-based company has been setting the course for agile production since 2015. The patented Hot Lithography process enables unprecedented additive manufacturing of durable precision components. Learn more at cubicure.com.

Formnext | Messe Frankfurt | Hall 11.1 | Booth C38

About UpNano GmbH (as of 2022)
Founded in September 2018 as a spin out of the TU Wien, UpNano is a Vienna-based high-tech company with the focus on development, manufacturing and commercialization of high-resolution 3D-printing systems based on 2-photon polymerization. With the first commercial product, the printing system NanoOne, microparts with structure details ≥170 nm can be printed. Due to the very fast printing process, also meso scale parts up to several centimeters in height can be realized.

Formnext | Messe Frankfurt | Hall 11.1 | Booth C88

Contact UpNano
Denise Hirner
Chief Operating Officer, Founder
Modecenterstrasse 22, D36
1030 Vienna, Austria
T +43 (0) 1 8901 652
M +43 (0) 676 3943 728
E [email protected]
W www.upnano.at
www.linkedin.com/company/upnano
twitter.com/upnano_gmbh

Contact Cubicure
Markus Kury
Chief Operating Officer
Gutheil-Schoder-Gasse 17
1230 Vienna, Austria
T +43 (0) 1 581 0439 15
M +43 (0) 664 51 56 61 8
E [email protected]
W www.cubicure.com

Copy Editing & Distribution
PR&D – Public Relations for
Research & Education
Dr. Barbara Bauder
Kollersteig 68
3400 Klosterneuburg, Austria
M +43 (0) 664 1576 350
E [email protected]
W http://www.prd.at/



Source link

Related posts

William Blair Hires Chief Human Resource Officer

businesegoal

ePowertrain Plant Opening and Product Highlights

businesegoal

How AI Could Soon Transform the Manufacturing Floor

businesegoal

Leave a Comment